FIPA

Product Details:

• Clamping diameter 10 mm
• Body and jaws made of anodized aluminum alloy
• Model SI with FDA-compliant silicone pad
• Model H with replaceable HNBR pads for gentle handling
• Index 1N and 1P for direct monitoring
• Principle of operation: single-acting
• Medium: filtered and oiled/unoiled air
• Ambient air temperature: -20 °C to +80 °C (-4 °F to 176 °F)

• Ambient air temperature for sprue grippers with sensor: -20°C to +70°C (-4 °F to 158 °F)
• Usage temperature for HNBR pads 15 to 150 °C (59 to 302 °F), for silicone pads 15 to 200 °C (59 to 392 °F)

Product Details:

• Grippers for small gates and limited space requirement
• High gripping force and wide jaw opening
• Housings and gripper jaws consist of an anodized, high-strength aluminum alloy
• Model H with replaceable HNBR pads for gentle handling
• Model SI with replaceable silicone pads for gentle handling at high temperatures
• Index 1N and 1P for direct sensor monitoring
• Index 2N and 2P for teachable sensors, direct/indirect sensor monitoring
• Index 3P for indirect sensor monitoring
• PNP Inverter 20.530 enables direct control of parts on gripper GR04.090-3N: Sensor triggers as soon as part is gripped
• The converter 20.531 enables the use of grippers in NPN circuits
• Single-acting
• Medium: filtered and oiled/non-oiled air
• Ambient air temperature: -20°C to +80°C (-4 °F to 176 °F)
• Ambient air temperature for sprue grippers with sensor: -20°C to +75°C (-4 °F to 167 °F)

Product Details:

• Manual interface between robot and gripper system
• Minimized downtime due to fast gripper change
• Robot side not included in scope of delivery

Product Details:

• Direct mounting of the spring leveler on the vacuum cup, no additional fitting required
• Compensate for height differences
• Soft attachment for sensitive products
• Leveling with an open spring

Product Details:

Additional Information:

• Delivery Time: Approx. 2 weeks
• Packaging Details: Air worthy packaging

Product Details:

• Single-acting grippers with high holding force
• Gripper bellow expanded by pneumatically driven piston, clamps workpiece at its inner surface
• Ventilation of gripper resets piston and bellow and releases workpiece
• Piston movement adjustable to position of gripped object
• Holding force controlled by feed pressure
• Robust body, made of anodized, high-strength aluminum alloy
• Elastomer bellows available in EPDM or silicone
• Easy and non-destructive exchange of bellows
• Piston movement adjustable to position of gripped object, bellow is not inflated, no risk of bursting

• Clamp the black part of gripper body or using optional extension tubes or threaded mounting brackets

• Clamp the red part of gripper body

Product Details:

Product Details:

• Manual interface between robot and gripper system
• Minimized down time due to fast gripper change
• Available in four sizes
• Clamping levers included in scope of delivery
• Base plates and pneumatic connections not included in scope of delivery

Product Details:

• Free moving and high-load capability with ball guide technology
• Flexible mounting via threaded body
• Body and rod made of anodized aluminum

Product Details:

• Handling of air-permeable products, or for high leakages
• High suction power for short evacuation times and fast vacuum build-up
• Particularly fast product release due to additional compressed air inlet for blow-off (65.410)
• Noise-optimized operation due to open silencer

Product Details:

• Pre-tension of the sealing lip enables gripping of uneven and slightly curved products
• Large
stroke

Product Details:

Product Details:

• Suitable for heavy-duty ejectors
• Open design, specially suitable for dusty, high-particle environments (e.g. wood industry)